Motorola CP200d 16Ch Two Way Radio AAH01QDC9JA2AN Mic PMMN4013A Speaker Issue

  
Please note, this radio powers on but battery will need to be replaced as it has a short life. Also the internal speaker is not working and will need to be fixed, or only use the PMMN4013A mic that is included at all times it can be used to still use the unit.

Motorola radio, and also includes Motorola PMMN4013A Windporting Remote Speaker Microphone. This was lightly wiped down with a disinfectant all purpose cleaner but will still need a final cleaning if you need it pristine as it was used on the jobsite so it does have some minor dust, and light cosmetic issues like sharpie on the front, As pictured.

Radio battery has been charged, and powers on and all buttons and knobs work but battery is old and needs to be replaced as i see it blinking red after turning on which I'd assume means the battery is getting weak. Some minor cosmetic issues as pictured but overall in usable shape if you don't mind the defects as mentioned!

Im not super familiar with all the inside and outside of these radios so I'll describe how they function so you can use your knowledge to understand if its a good fit for you. Please make sure you have the software and hardware needed or else you will have to use these radios with the channel frequencies they currently have loaded or send them to be programmed by a radio company. Has 16 channels, channels 3-7 seem to be programmed, and i tested them back and forth between the model radios I have with no issues I could find. Channels 1-2 are silent, and when hitting the talk button beeps after about 2 seconds of holding that button down it beeps as long as you hold it, channels 8-16 just have the long drone beep going.

The red light will blink on top, not sure if that's indicating a new battery needed soon or not, but they never died during my testing. I have multiple listings with these radios in other listings so if you need a few, please feel free to reach out.